EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Demand Controller is often a very economical solar controller designed for off-grid solar techniques. Based upon multiphase synchronous rectification technologies, it assures optimized Strength conversion and technique security for a wide array of photovoltaic (PV) purposes.
Vital Options of the EPEVER Tracer AN Series Controller
The Tracer AN series makes use of EPEVER Photo voltaic Cost Controller know-how for remarkable photo voltaic Power harvesting. Important characteristics involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Screen with true-time knowledge checking.
Various Load Control Modes including manual and timer.
In depth Digital Protections from overcharging, about-discharging, limited circuits, and reverse polarity.
Stage-by-Phase Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Planning the Controller
Make certain all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and consumer guide.
Verify the model variety and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry location near the battery financial institution.
Secure the Tracer AN controller using the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by right security protocols and ensure the method is powered off ahead of connecting parts.
Action 1: Join the battery terminals to your cost controller (good to favourable, detrimental to adverse).
Stage 2: Link the photo voltaic panel array on the PV enter terminals.
Phase 3: Connect the load terminals if employing a immediate load link.
Step four: Double-Test all connections for polarity and tightness.
4. More info Configuring the Controller Configurations
Electric power on the controller by connecting the battery 1st.
Make use of the LCD Screen to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild Command.
five. Monitoring and Info Logging
The Tracer AN Series supports serious-time checking utilizing the MT50 remote meter.
Facts is often logged through the RS485 conversation port using program for example Solar Station PC.
Distant checking is feasible Along with the EPEVER WiFi module.
six. Troubleshooting Popular Issues
Situation 1: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern 2: Around-Voltage Defense
Validate the solar array’s voltage score.
Alter system parameters if necessary.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options from the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technologies makes sure:
Greater Performance: Reduced energy losses throughout conversion.
Increased Trustworthiness: Stable functionality less than variable masses.
Longer Battery Everyday living: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technological know-how is undoubtedly an exceptional choice for optimizing solar energy technology and extending battery lifetime. By following the above set up guide, end users can make certain optimum performance and system longevity.